Descargar Imprimir esta página

EUFY RoboVac X9 Pro Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46
Preparation
Remove the foam blocks beside the bumper before use.
Install the Auto-Clean Station in a location that RoboVac can easily
access. It is recommended to place it against a wall, and on a hard,
level surface.
It is recommended to remove objects within 1.6 ft / 0.5 m to the
left and right sides and within 4.9 ft / 1.5 m of the front of the Auto-
Clean Station. If you cannot remove the objects, move RoboVac to
a new place and check whether RoboVac can return to the Auto-
Clean Station normally; if not, contact us at support@eufylife.com for
suggestions.
06 EN
Add tap water until it reaches the MAX water line.
MAX
Connect the power cord to the Auto-Clean Station and a wall outlet.
When the Auto-Clean Station connects to AC power, the LED
indicator on the Auto-Clean Station is steady blue.
• Always keep the Auto-Clean Station plugged in to ensure
the infrared connection between RoboVac and the Auto-
Clean Station is successful, otherwise RoboVac will not
automatically return to it.
Use the Auto-Clean Station
• Make sure the power cord is connected to a power outlet.
• To preserve the battery's lifespan, recharge at least once
every 6 months.
• RoboVac will lift up its mopping pads automatically when
attached to the Auto-Clean Station.
Attach RoboVac to the Auto-Clean Station by aligning its charging pins.
RoboVac starts charging automatically.
The mopping pads will be automatically cleaned and dried when
RoboVac returns to the Auto-Clean Station.
LED Indicator
Status of Auto-Clean Station
(on the top)
Standby
Steady blue
Cleaning mopping pads
Pulsing blue
Abnormal working status
Steady red
Turn On / Off
Press and hold
for 3 seconds to turn RoboVac on or off.
3s
Use Your RoboVac with the eufy
Clean App
To enjoy all the available features, it is recommended to control your
RoboVac via the eufy Clean app.
Before you start, make sure:
• Your smartphone or tablet is running iOS 10.0 (or above) or Android
5.0 (or above).
• The 2.4GHz band wireless signal is enabled on your wireless router.
eufy Clean
EN 07

Publicidad

loading