MSW Motor Technics MSW-DEH4050H Manual De Instrucciones página 25

"Tank full" LED
indicator
LED timer
indicator
LED defrost
indicator
AUTO button
In-dry button
Digital display
3.2.2. Settings
Mode of operation
A. Operation in the AUTO mode
Press the POWER button to turn on the device. Then press the AUTO button and the
display will show the AU message.
The unit starts dehumidifying in the AUTO mode, regardless of the humidity. In this
mode, you cannot set the humidity level or the timer. In this mode, the humidity is set
on 50%.
B. Normal operation
Press the POWER button to turn on the device.
Humidity setting (setting range: 10% -95%):
The humidity can be adjusted in the normal operating mode.
Press the ADD/MINUS button several times to adjust the humidity setting.
Set the humidity level between 40% and 60% for comfort.
The device will turn on and off to maintain this level.
It lights up when the water tank is almost full.
It lights up when the timer function is on.
It lights up when automatic defrosting is in progress.
When the AUTO dehumidification mode is on, you can press the
ADD, MINUS and SET button, but you cannot change the
humidity data and set the ON/OFF timer.
After turning off the device, press this button and the device
will dry inside.
Displays the current humidity (20-95%) and the humidity
setting (10-95%).
Displays the timer setting and temperature.