Publicidad
Idiomas disponibles
Idiomas disponibles
Drying the inside
After turning off the unit, press the IN-DRY button to dry the inside of the unit. This will
prevent water-induced corrosion of the unit.
Room temperature control
The LED display
Automatic defrosting function
At low room temperatures, frost can build up on the evaporator, reducing the airflow
during dehumidification.
The dryer will automatically start defrosting for 15 minutes.
The LED diode
The compressor stops and the fan continues to run.
Do not turn off the unit, it will automatically resume dehumidification.
Overload protection
In the event of a power loss, there is a 3-minute delay until the compressor restarts,
which protects the compressor.
3.2.3. Water drainage
Emptying the water tank
The machine will turn off as soon as the water tank is full. The dehumidifier will work
again after emptying the water tank and installing it correctly.
1) When the tank is full, the "FULL" light will light up
2) The device will be beeping. Press the power button to turn off the device.
3) To empty the water tank, open the front panel to access it.
4) Grasp the handle of the water tank and pull it out horizontally.
5) After the water has been removed, install the tank and close the front panel.
6) Press the POWER button to wake up the unit.
shows the current temperature in the room.
flashes.
.
Publicidad
