MSW Motor Technics MSW-DEH4050H Manual De Instrucciones página 26

Timer setting (1-24 hours):
Press the SET button to set the timer.
Setting the switch-off time while the device is turned on:
Press the SET button to activate the timer function.
•
• Press the ADD/MINUS buttons accordingly to set the switch-off time.
Setting the switch-on time while the device is switched off:
Press the SET button to activate the timer function.
•
Press the ADD/MINUS buttons respectively to set the time to turn on the unit.
•
Setting the device's work cycle while the machine is turned on:
Press the SET button to activate the timer function.
•
• Press the ADD/MINUS buttons respectively to set the device shut-off time,
Press the ADD/MINUS buttons respectively to set the time to turn-on the
•
device.
The unit will operate at the set ON/OFF time cycles.
•
Setting the operating cycle of the device while the device is turned off:
Press the SET button to activate the timer function.
•
• Press the ADD/MINUS buttons respectively to set the time to turn-on the
device.
Press the ADD/MINUS buttons respectively to set the device shut-off time,
•
The unit will operate at the set ON/OFF time cycles.
•
Deleting the timer settings:
Press the SET button again to turn off the timer function.
Note: Pressing POWER will also exit the timer setting.
Water full indicator.
The device automatically turns off when the water tank is full, alerting the user via the
LED indicator
If the water tank is full, empty the water tank and install it again.
•
• If the water tank is not attached properly, the LED will be on and the unit will
not work. Install the tank correctly and the unit will turn on automatically with
the last setting.
and beeping all the time. This is a reminder to check the following: