DynaTrap DT150-TUN Manual Del Propietário

MODEL: DT150-TUN
OWNER'S MANUAL
Thank you
FOR
for purchasing this
INDOOR USE
DYNATRAP Insect Trap!
®
This product may be covered by one or more U.S. patents
or pending patent applications. See www.dynatrap.com/patents
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
WARNING, When using electric appliances, basic precautions should always be followed, including the following:
– To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.
– Unplug from outlet when not in use and before servicing or cleaning.
– To reduce the risk of electrical shock, do not put appliance in water or other liquid.
– This appliance is provided with double insulation. Use only identical replacement parts.
CAUTION: To reduce the risk of injury from moving parts, unplug before servicing.
WARNING: Risk of Electric Shock.
See instructions for Servicing of Double-Insulated Appliances.
INSTRUCTIONS FOR DOUBLE-INSULATED, CORD-CONNECTED APPLIANCES:
In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided
on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing of a double-insulated
appliance requires extreme care and knowledge of the system, and should be done only by qualified service personnel.
Replacement parts for a double-insulated appliance must be identical to those parts in the appliance.
IMPORTANT SAFETY INSTRUCTIONS
Please read these instructions before using the DynaTrap ® Insect Trap and keep for future reference.
1. Always turn unit off and disconnect plug before servicing, cleaning, or changing bulb.
2. Do not position the unit near heat, gas, oil or other flammable materials.
3. Mount product out of reach from children.
4. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or if it has been dropped into water.
5. Do not insert fingers or any foreign objects into the unit while it is connected to an electrical outlet.
6. Collected insects within the unit may contribute to fire, so clean insects from the unit frequently.
7. Do not clean this product with water spray. Do not place where it can fall into water, or near flammable materials.
8. Do not touch fan while in motion.
9. Do not abuse cord—never carry or hang unit by cord or yank it to disconnect from receptacle. Keep cord away from heat,
oil, or sharp edges.
10. Use only extension cords that are clearly marked "Suitable for Use with Outdoor Appliances" and that have plug and
receptacles that match the product plug. Replace all damaged cords.
11. Only use attachments recommended or sold by the manufacturer.
12. Do not use outdoors.
IMPORTANT SAFETY INSTRUCTIONS
13. SERVICING OF DOUBLE-INSULATED APPLIANCES - In a double-insulated appliance, two systems of insulation are provided
instead of grounding. No grounding means is provided on a doubleinsulated appliance, nor should a means for grounding
be added to the appliance. Servicing of a double-insulated appliance requires extreme care and knowledge of the system,
and should be done only by qualified service personnel. Replacement parts for a double-insulated appliance must be
identical to those parts in the appliance. A double-insulated appliance is
marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED." The symbol
INSTALLATION & OPERATING INSTRUCTIONS
1. Unpack Unit. Save carton for off-season storage (if needed).
2. Plug cord into an outlet or UL listed extension cord as described in
"IMPORTANT SAFETY INSTRUCTIONS".
3. Grasp the top of the unit and twist the unit to the "OPEN" position.
4. Catch rate activity will be higher at night. For best catch results it
is recommended to keep the unit away from competing light
sources. Intended for household use only.
USER-MAINTENANCE INSTRUCTIONS - CLEANING
Frequent cleaning will prolong the life of the unit, ensure fire prevention and provide for more efficient operation.
1. Be sure to clean the unit at least once per week.
2. To clean, grasp the top of the unit and twist the unit to the "CLOSE" position and unplug the unit.
3. For weekly cleaning, remove the cage by turning it clockwise. Remove any buildup from the inside of the retaining cage and
fan with a brush.
4. When replacing the retaining cage – DO NOT press/push against the screen windows.
HOW THE DYNATRAP INSECT TRAP WORKS
®
Flying insects are attracted to the unit by the UV light and CO
2
that is generated by the photo-catalysis between the UV lamps
and the special TiO coating. The fan then pulls the insects into
2
the screened base, trapping them until they dehydrate and
die. The base can be removed, allowing the contents to be
periodically emptied into the trash. The see-through screen
shows the insects trapped in the compartment, alerting you
when the cage needs to be emptied.
FAN
RETAINING
CAGE
TROUBLESHOOTING
Problem:
Bulbs do not illuminate
and fan does not spin.
Bulb illuminates, but fan
does not spin.
Fan spins, but bulb does
not illuminate
LIMITED WARRANTY
DYNAMIC warranties to the original purchaser that this product is free from defective materials and
workmanship. This warranty is limited to remedy any defective part for a period of one year from date of
original date of purchase. Retain your original receipt as proof of purchase. This warranty does not apply
to the light bulb, nor to, in our judgment, misuse or abuse. If this unit has been altered, no warranty is in
force. This warranty applies only if sold by authorized DYNAMIC distributors. In no case shall DYNAMIC
be liable for any accidental, punitive, consequential, or any other damages of any kind for breach of this
or any other warranty, expressed or implied, whatsoever. Some states do not allow limitation on how
long an implied warranty lasts, so the above limitation or exclusion may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights that vary from state to state.
PARTS & ACCESSORIES AVAILABLE
PART
4166-DT150
UV
BULB
Dynamic Solutions Worldwide, LLC
12247 W. Fairview Ave. Milwaukee, WI 53226
Phone: 414-431-2819
Toll free: 1-877-403-TRAP (8727)
Toll free fax: 877-403-3293
Email: dynatrapinfo@dsw-llc.com
Visit us online at www.dynatrap.com
TiO2 COATED
SURFACE
© Dynamic Solutions Worldwide, LLC
SAVE THESE INSTRUCTIONS
Possible cause: Correction:
1. No electrical power 1. Check plug and receptacle and fuse or circuit breaker.
2. Check to make sure the power supply is connected
firmly on top of the unit.
1. Shorted fan 1. UNPLUG UNIT: Examine fan to see that it is free from
foreign material, dirt or build-up of dead insects. Clean unit as
in "CLEANING" section.
1. Burnt out bulb 1. Call Dynatrap customer service at 877-403-8727
DESCRIPTION
Power Supply
This device complies with
Performance Standards for
Light-Emitting Products, 21 DFR,
Part 1040, Chapter 1,
Subchapter J, Radiological Health.
For Household
Use Only
A000-399.6