Suntec Wellness Klimatronic SNOW 12.000 Eco Manual Del Usuario página 16

1 Control panel
2 Air outlet
3 Carrying Handle
4 Air Inlet
Exhaust hose installation
•
Place the unit on a flat surface near a power socket, but at least 50cm away to other objects
•
Connect the exhaust hose adapters with one end each of the exhaust hose by turning. Then, fix the
exhaust hose at the back of the portable local air conditioner (see pic.1).
Pic. 1
•
Temporary exhaust hose installation: Please lead the free end of the exhaust hose out of the window.
•
Exhaust hose installation with window kit: Depending on your type of window, insert the window kit
horizontally or vertically into your window. Lead the exhaust hose through the hole at the window kit
(see pic.2 and 3).
•
Make sure that the outlet is not blocked to prevent damage to the unit.
•
The exhaust hose should not be bent.
Commisioning
Please place the device on a firm, level surface in an area with at least 50 cm free space around the device to
ensure good air circulation.
Do not operate the unit in the immediate vicinity of walls, curtains or other objects that may block air entry or
exit. Please keep the air inlet and outlet free of obstructions.
Never install the unit:
- Near heat sources such as radiators, heat registers, stoves, or other products that produce heat.
- In direct sunlight
- In places where the device is exposed to vibrations or shocks
- In overly dusty places.
- In a cupboard or similar poorly ventilated place.
- On uneven surfaces
Pic. 2
5 Castor
6 Drain Opening
7 Exhaust Air Outlet
Pic. 3