Obligations Of The Operator; Qualified And Trained Technicians; Obligations Of Personnel; Maintenance And Repair - Fronius TIG Grinder Manual De Instrucciones

Obligations of the
operator
Qualified and
trained techni-
cians
Obligations of
personnel
Maintenance and
repair

Copyright

The operator must only allow persons to work with the device who:
- are familiar with the fundamental instructions regarding safety at work and
accident prevention and have been instructed in how to use the device
- have read and understood these operating instructions, especially the
section "safety rules", and have confirmed as much with their signatures
- are trained to produce the required results.
Checks must be carried out at regular intervals to ensure that operators are
working in a safety-conscious manner.
Only qualified technicians, who have attended the appropriate Fronius training
course, are permitted to commission and operate the device. The information
in these operating instructions is only intended for these persons. Do not carry
out any procedures apart from those described in the operating instructions.
This applies even if you are qualified to do so.
Before using the device, all persons instructed to do so undertake:
- to observe the basic instructions regarding safety at work and accident
prevention
- to read these operating instructions, especially the "Safety rules" section
and sign to confirm that they have understood them and will follow them.
Before leaving the workplace, ensure that people or property cannot come to
any harm in your absence.
Maintenance and repair work must only be carried out by authorised person-
nel. Use only original spare and wearing parts (also applies to standard parts).
It is impossible to guarantee that bought-in parts are designed and manufac-
tured to meet the demands made on them, or that they satisfy safety require-
ments.
Do not carry out any modifications, alterations, etc. to the device without the
manufacturer's consent.
In addition to following the maintenance instructions, the device must be care-
fully monitored and any malfunctions must be rectified immediately. The man-
ufacturer accepts no liability for consequential damage caused by inadequate
maintenance or incorrect operation of the device.
Copyright of these operating instructions remains with the manufacturer.
The text and illustrations are all technically correct at the time of printing. We
reserve the right to make changes. The contents of the operating instructions
shall not provide the basis for any claims whatsoever on the part of the pur-
chaser. If you have any suggestions for improvement, or can point out any
mistakes that you have found in the instructions, we will be most grateful for
your comments.
43