Philips Sonicare DiamondClean Smart Manual Del Usuario página 21

Charging
2
1
Charging on charging base
1 Plug the cord of the charging base into an electrical
outlet.
2 Place the charging stand or the charging glass on the
charging base.
3 Place the handle on the charging stand or in the
charging glass.
- The battery indicator and light ring illuminate
white and the handle beeps twice. This indicates
the toothbrush has started charging.
4 The charger will charge your toothbrush until it is fully
charged.
- The handle is charging when the battery indicator is
flashing white. When the handle is fully charged, the
battery indicator lights up white for 30 seconds and
then switches off.
Charging with the travel case
Note: Accessories included may vary based on the model
purchased.
1 Take the USB cable from the bottom of the charging
travel case.
2 Connect the charging travel case via the USB cable to
5V DC input power either from:
- The USB adapter provided
- a UL-listed or certified to ANSI/UL 60950-1
personal computer's standard USB connector or,
- a UL-listed or certified to ANSI/UL 60950-1 LPS
power supply with USB output port or,
- a UL-listed or certified 1310 Class 2 power supply.
3 Place the handle in the travel case. The travel case
charges your toothbrush until your toothbrush is fully
charged.
21
English