Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
CAUTION! Always ensure that the trigger switch is in the Off position and that the battery
pack has been removed before adjusting or servicing the tool's functions.
INSTALLING AND REMOVING THE BATTERY PACK
•
Do not press the on/off trigger switch before inserting or removing the battery pack
•
To remove the battery pack, press the button located on the top of the battery pack.
•
To insert the battery pack, align the tab on the pack with the slot in the housing and slide it into
place. Always insert the package as far as it will go until you hear a "click". If not, there is a
risk that the package will fall out of the
TRIGGER SWITCH ACTUATION
•
Before inserting the battery pack into the tool, always check that the trigger switch is operating
properly and that it returns to the "OFF" position when released.
•
To switch the tool on, simply press the trigger switch. The speed of the tool will increase as you
press the trigger switch harder. -Release the trigger switch to stop the tool.
Press to _ start up
ELECTRIC BRAKE
This tool is equipped with an electric brake.
Direction change/rotation button
•
The direction change button allows you to reverse the direction of rotation of the chuck
(forward/reverse).
tool, causing injury to the operator and bystanders.
43
Publicidad
