Publicidad
Idiomas disponibles
Idiomas disponibles
BASIC RECORDING
This section
explains
how to record from the tuner, CD player,
MD recorder
or external
equipment.
m
When an MD recorder
or other optional
equipment
is connected
to this unit, you can also record from an MD or the connected
equipment.
For how to connect an MD recorder and other optional equipment,
see page 17.
Q~
b
!!
JJ
ti
1
"""'"""!'
......
J
Preparation
Set the tape to the point where
recording
will start.
Use
Type I (normal) and Type II (high/CrOz)
tapes for recording.
1
2
3
4
Insert
the tape to be recorded
on into the deck.
Insert the tape with the side to be recorded
on first facing out
from the unit and the exposed
side down.
I
—
EJECT
Press the TAPE/REV
MODE button to select the
reverse mode.
To record on one side only, select
Z.
To record on both sides, select 11 or (1).
Press the MODE button repeatedly until "DOLBY"
appears on the display. Then, turn the MULTI JOG
dial right or left to turn Dolby NR on or off within
10 seconds.
To record with DOLBY
NR, turn the dial so that "DOLBY
ON"
is displayed.
(The Do
NR indication also turns on.)
To record without
DOLBY
NR, turn the dial so that "DOLBY
oFF'r is displayed.
Press one of the function
buttons and prepare
the source to be recorded.
To record from a
CD, press the CD button and load the disc.
To record from a radio broadcast,
press the TUNER/BAND
button and tune in to a station.
To record from an MD,
press the MD button
and load an
MD.
To record from the connected source,
press the VIDEO/
AUX button and prepare
to play.
5 Press the
button to start recording.
When
the selected
function
is CD, playback
and recording
start simultaneously.
When
the selected
function
is MD or VI DEO/AUX,
start
playback.
To stop recording,
press the
button.
To pause recording,
press the II button.
(Applicable
when the
source is TUNER,
MD, VI DEO/AUX.)
To resume recording,
press
again.
To
start recording with the remote control
First press the
button,
and then press the >
button within 2
seconds.
INSERTING BLANK SPACES
Insertion
of 4-second
blank
spaces
enables
activation
of the
Music Sensor function.
(Applicable
when the source is TUNER,
MD, or VIDEO/AUX.)
1
2
Press the
button during recording or while in recording
pause mode.
The.
button flashes for 4 seconds
and the tape runs without
recording.
After
4 seconds,
the deck enters
the recording
pause mode.
Press the II button to resume recording.
To insert a blank space of less than 4 seconds,
press the
button again while the button is"flashing.
To insert blank spaces of more than 4 seconds,
after the
deck enters
recording
pause mode,
press the .
button again.
Each time the button
is pressed,
a 4-second
blank
space
is
added.
To erase a recording
1
2
3
4
Insert
the tape to be erased
into the deck.
Set the tape to the point where the erasure
is to be started.
Press the VIDEO/AUX
button.
If an optional
equipment
is connected
to the VIDEO/AUX
jacks, turn it off.
Press the
button to start the erasure.
13
ENGLISH
Publicidad
