Magmaweld monoCUT 45ix Manual Del Usuario página 22

22 Operation
EN
USER MANUAL
It shows the gas pressure value graphically.
Gas Pressure Chart
If the graph is empty, the optimum gas pressure set by the power supply is selected.
The middle of the graph shows the optimum gas pressure (4.8 BAR / 70 PSI).
The gas pressure will increase when you turn the pot to the right when adjusting the gas
pressure. The right area of the graph starts to fill up. The maximum gas pressure setting is
5.5 BAR (80 PSI).
The gas pressure will decrease when you turn the pot to the left when adjusting the gas
pressure. The left area of the graph starts to fill up. The minimum gas pressure setting is
4.4 BAR (64 PSI).
It provides switching to current and gas pressure values in manual mode. Adjustments are
Current / Gas Selection Button
made in these tabs with the adjustment pot.
It displays the error icon and code.
Error Code
It indicates that the remote connection is active.
Remote Connection
monoCUT 45ix / monoCUT 45i
www.magmaweld.com