Norwood LumberMax HD38 Instrucciones Originales página 16

Installation: Log Clamp
Assemble the factory assembled
hydraulic clamp sub-assembly with
the horizontal shim (item #33) and the
cylinder slider mount bracket (item #30)
using the 3/8" x 1 1/2" bolts (item #4).
Note: Do not forget the shims (item #33).
Install the hydraulic cylinder (item #12)
onto the log dog bar (item #28) using
the 1/2" x 1 3/4" bolts (item #2) and nuts
(item #1). See left picture for cylinder
orientation.
Install the 3/8 MJ x #4 SAE male 90
degrees hydraulic fittings (item #16).
(four places)
EN–8