Descargar Imprimir esta página

Dacor DMO30U970S Serie Manual Del Usuario página 33

Publicidad

Idiomas disponibles

Idiomas disponibles

Replacing the oven light
When replacing the oven light, make sure that you are wearing gloves to avoid
injury from the heat of the lamp.
Hook
Hook
Press
Press
Pull out
Pull out
Bend
Bend
NOTE
To purchase a new LED lamp board, visit an authorized Dacor service center or call
(800) 793-0093.
DMO30U970SS_DA_DE68-04568E-00_EN.indd 33
DMO30U970SS_DA_DE68-04568E-00_EN.indd 33
1.
Unplug the oven or turn off the power
at the main power supply.
Remove the vent cover mounting screw
2.
and then remove the vent cover.
3.
Lift up the holder lamp by pushing the
hook slightly.
4.
Press the hook of connector which is
locked to the LED lamp board and pull
out the wire connector.
5.
Remove LED lamp board by bending
hooks which is holding it.
6.
Replace the LED lamp board. To
assemble LED lamp board, proceed
opposite order from above instructions.
7.
Plug the oven in or turn on the power
at the main power supply. Set the clock
again.
Cleaning the baffle filter
Your microwave oven has reusable baffle filter. The baffle filter should be removed
and cleaned at least once a month or as required.
To order a new baffle filter, contact Dacor Customer Service at (800) 793-0093.
You can also order online at (http://www.dacor.com/Customer-Care/Service-Parts).
WARNING
To avoid the risk of personal injury or property damage, do not operate the oven
hood without the filter in place.
1.
Lift
Lift
Pull out
Pull out
2.
To remove the filter, lift the handle of
the baffle filter and pull out from the
microwave oven.
Remove the clip from the ring and
remove the baffle filter.
English 33
4/13/2023 1:29:49 PM
4/13/2023 1:29:49 PM

Publicidad

loading

Este manual también es adecuado para:

Dmo30u970ss/da