Publicidad
NOTES:
1)
Mtr. Hsg., Brg., Stator & Term (Item 7) are preassembled at the factory and must be replaced as a
unit. Stator is permanently attached to the Motor Housing. Plug (Item 27); Seal, Thru Wall Term.
(Item 26) and Bearing - Upper (Item 10) are replaceable.
2)
When ordering Motor Housing, Bearing, Stator and Term. (Item 7) or Rotor (Item 16) specify
either GE or Emerson motor. GE motor can be identified by (4) half oval slots spaced at 90°
around the outside diameter of the stator. Emerson motor can be identified by (2) half oval slots
spaced at 180° around the outside diameter of the stator.
3)
When orderin these parts, customer must identify if switch is a General Electric switch.
4)
If an "X" follows Model No., or Date Mfg. on brass ID tag, consult factory for ordering any parts.
5)
See FM0160 Parts Price Sheet for listing of parts prices.
6)
"NA" indicates, not applicable.
© Copyright 2013 Zoeller Co. All rights reserved.
2
DATE CODE OF MANUFACTURE
FROM 12/70 to 12/88
1st LETTER MONTH
M --- JAN.
T --- JULY
A --- 1971
N --- FEB.
U --- AUG.
B --- 1972
O --- MARCH V --- SEPT.
C --- 1973
P --- APRIL
W --- OCT.
D --- 1974
R --- MAY
X --- NOV.
E --- 1975
S --- JUNE
Y --- DEC.
F --- 1976
NOTE: Four digit (MMYY) date of mfg. used after June, 1988.
IE: MMYY = 0192 = Jan. 1992.
2nd LETTER YEAR
G --- 1977
O --- 1983
H --- 1978
P --- 1984
I --- 1979
R --- 1985
J --- 1980
S --- 1986
M --- 1981
T --- 1987
N --- 1982
U --- 1988
Publicidad
