Smeg BLF03PGEU Manual De Uso página 22

4 Functions
Safety lock system
The blender is fitted with a safety
lock system that automatically
switches off the blender when the
jug is removed. It also features a
motor safety cut-out which trips if
the motor is overloaded.
Smooth Start System
When the appliance is started, the
speed gradually increases until the
set speed is reached. This prevents
damage to the appliance and
accessories, prevents ingredient
spillage and improves mixing.
The Smooth Start system only
works when a speed between 1
and 4 is selected and does not
work in PULSE mode or with pre-
set programs.
22
Use
PULSE function
When the product is operating at speeds
1-3, pressing the PULSE button will run the
blender at maximum speed.
The device will return to the initial speed that
was selected when the button is released.
When the product is off, turning the knob
to one of the 4 speeds and pressing the
PULSE button will make the blender run at
the selected speed.
The PULSE function does not work
in combination with the pre-set
programs.
Pre-set programs
When one of the four above mentioned
pre-set programs is selected, after you have
pressed the START button, the blender
will start to operate automatically and the
central button LED will light up to indicate
that the cycle is running. The button LED
switches off at the end of the cycle.
For further information, see the table
"4.1 Speed setting suggestions when using
the pre-set programs".