MHZ Roll Up 24 RTS Instalación Y Operación página 15

Advanced settings
Adjusting the top end position
Briefly press the UP button to move the blind to the top end position.
=> The blind moves to the top end position, where it stops automatically.
Press and hold the UP and DOWN buttons simultaneously until the blind
briefly moves up and down.
=> The drive is ready for teaching-in.
Press and hold the UP and DOWN buttons until the
blind has reached the new end position you want.
To confirm the new end position, press and hold the my button
until the blind briefly moves up and down and the green LED flashes five times.
=> The new top end position has been saved.
Adjusting the bottom end position
Briefly press the DOWN button to move the blind to the bottom end position.
=> The blind moves to the bottom end position, where it stops.
Press and hold the UP and DOWN buttons simultaneously until the blind
briefly moves up and down.
=> The drive is ready for teaching-in.
Press and hold the UP and DOWN buttons until the
blind has reached the new end position you want.
To confirm the new end position, press and hold the my button
until the blind briefly moves up and down and the green LED flashes five times.
=> The new bottom end position has been saved.
Teaching-in a my position (favourite position)
Press and hold the UP or DOWN button until the blind has reached the position you want.
=> Briefly press the my button to stop the blind moving.
Press and hold the my button until the blind briefly moves up
and down.
=> The my favourite position has been programmed and the green LED flashes five times.
Edition 10.2021
Subject to technical changes I
Operating and installation instructions
ROLLER BLIND R_03 12 V radio drive
my
my
my
my
my
my
my
my
my my
my
my
my
my
my-Position
15
DE
FR
NL
EN
ES
IT