MHZ Roll Up 24 RTS Instalación Y Operación página 16

Operating and installation instructions
ROLLER BLIND R_03 12 V radio drive
Adding/deleting a control unit
DE
i The orange LED flashes slowly when a radio transmitter is being
added or deleted.
i Various transmitters and their channels are classed as control units.
Using a control unit (A) that has already been taught-in to the blind:
Press the programming button on the control unit (A) until the blind briefly moves up
and down
=> The green LED flashes five times, then the orange LED flashes slowly.
Briefly press the programming button on the back of the new control unit (B)
to add or delete the control unit.
FR
=> The drive is ready for teaching-in.
Using the programming button on the drive head:
Press the programming button on the drive head until the blind briefly moves up and down.
=> The green LED flashes five times, then the orange LED flashes slowly.
Briefly press the programming button on the control unit (B) to add or delete the control
unit.
=> The green LED flashes five times.
NL
Replacing a lost transmitter
Press the red PROG button on the drive until the blind confirms the button press by moving
briefly up and down.
=> The drive is now ready for teaching-in.
Press the PROG button on the new radio transmitter until the blind confirms the button press
by moving briefly up and down.
=> The radio transmitter has been taught-in.
=> The drive is in normal mode (self-retaining).
EN
ES
16
IT
Prog. A
Prog. B
Prog. B
04-ROLLO R_03 12V Akku Somfy_S3-2.ai
Subject to technical changes I
Edition 10.2021