Publicidad
Idiomas disponibles
Idiomas disponibles
EN
8
OPERATION
Wear eye protection during operation.
8.1
START THE MACHINE
2
1.
Make sure safety key is inserted into slot.
2.
Push and hold the start button.
3.
While you hold the start button, grab the start
handles in the direction of the handle bar.
4.
Once the machine has started, you can release
the start button.
5.
Press the Turbo button to speed up to 3,200
RPM.
Battery capacity indicator (23)
Lights
Capacity
4 Green
The battery is above 80% capacity
Lights
3 Green
The battery is between 80% and 60%
Lights
capacity
2 Green
The battery is at between 60% and
Lights
40% capacity
1 Green
The battery is between 40% and 20%
Light
capacity
Lights go
The battery is less than 20% capacity
out
and requires charging immediately
8.2
STOP THE MACHINE
1.
Release the start handle to stop the machine.
Wait until the blade fully stops before you start the
machine again. Do not quickly turn the machine off
and on.
WARNING
1
2
WARNING
English
Always remove the safety key and battery pack after
you complete the work.
8.3
OPERATE THE SELF-PROPEL DRIVE
SYSTEM
1.
Start the machine.
2.
While you hold the start handles, grab either of
the drive levers and pull towards the handle bar.
3.
Hold the start handles and the drive levers at the
same time.
4.
Release either set of start handle and drive lever
from the same side.
5.
Adjust the speed control with your free hand.
• Slide the speed control button in the direction
of the Rabbit Symbol to increase the speed.
• Pull the speed control button in the direction of
the Turtle Symbol to decrease the speed.
6.
Release the drive levers to close the self-propel
system.
To engage the self-propel drive system while the
mower is not running:
• Press and hold the start button, then pull up on the
drive lever.
OR
• Pull up on the drive lever, then press the start
button.
12
WARNING
Publicidad
