Publicidad
Idiomas disponibles
Idiomas disponibles
EN
9.2
REPLACE THE BLADE
Use only approved replacement blades.
Wear heavy gloves or wind cloth around the blade
when you touch the blade.
1.
Stop the machine.
2.
Make sure that the blade is fully stopped.
3.
Remove the safety key and battery pack.
4.
Turn the machine to its side.
5.
Use a piece of wood to prevent the movement of
the blade.
6.
Remove the mounting screw and spacer with a
wrench or socket.
7.
Remove the blade.
8.
Install the new blade. Make sure that the arrows
on the fan engage the holes in the blade.
9.
Put in the spacer and tighten the mounting screw.
Recommended tightening torque: 24-27 ft.lbs.
33-37 N.m.
9.3
STORE THE MACHINE
• Remove the safety key.
• Remove the battery pack(s).
• Clean the machine before storage.
• Make sure the motor is not hot when you store the
machine.
• Make sure that the machine does not have loose
or damaged parts. If it is necessary, follow these
instructions:
• Replace the damaged parts.
• Tighten the bolts.
• Speak to a person at an approved service center.
• Store the machine in a dry area.
WARNING
WARNING
NOTE
English
• Make sure that children cannot come near the
machine.
9.4
VERTICAL STORAGE
1.
Remove the grass catcher.
2.
Remove the battery and safety key.
3.
Pull through the handle holes to fold away the
handles.
4.
Lock the handles into position.
5.
Stand the machine on end and make sure that
the brackets touch the floor.
10
TROUBLESHOOTING
Problem
The handle is
not in position.
14
Possible cause Solution
The bolts are
Adjust the
not engaged
height of the
correctly.
handle and
make sure that
the bolts and
nuts are aligned
correctly.
Publicidad
