AstroAI GL-1402A Manual Del Usuario página 5

OPERATION INSTRUCTIONS
EN
CHECKING TIRE PRESSURE
1. Connect the inflator gauge to an air compres-
sor using the quick-connect air fitting.
2. Turn the inflator gauge on by pressing
the Power / Unit button. Press it again to
select the unit you would like to measure
in. Press the Air Bleed Valve / Reset
button to ensure the gauge is set to zero.
3. Use the chuck to connect to the tire valve
by pressing the tire's valve stem into the
mouth of the chuck. The twist-on chuck
will screw into the threads of the tire's
valve stem. For the locking chuck, press
the trigger while placing it onto the valve
stem and release it once there is a strong
seal. It should lock into place.
4. Fill by pressing the valve trigger until the
desired pressure is reached.
NOTE: While filling the tire, the pressure
reading will not indicate the exact pressure of
the tire. To check on the tire's current pressure,
release the valve trigger and the display will
instantaneously show the tire's pressure.
- 04 -