Descargar Imprimir esta página

Craftsman 358.794961 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

Latch Area
\
3.
Remove the vacuum
bag.
4.
Close the vacuum
inlet cover and
make sure it is latched
closed.
5.
Reinstall the blower tube (see
BLOWER TUBE ASSEMBLY).
SHOULDER
STRAP
ADJUSTMENT
(for vaeuurn
use only)
1. Hold the unit as shown with the
muffler side facing away from your
body and clothes.
2.
Pass the shoulder strap over your
head and onto your right shoulder.
3. Extend your left arm toward the
rear of the vacuum
bag.
4. Adjust shoulder strap until the vac-
uum bag/shoulder
strap seam lies
between
your thumb and index
finger.
5. Make sure air flows freely from the
elbow tube into bag. If bag is kinked,
the unit will not operate properly.
KNOW YOUR BLOWER
READ THtB INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT Compare the illustrations with your unit to familiarize yourself with the location
of the vadous controls and adjustments.
Save this manual for f_tute reference.
MULCHING
BLADES
Your blower is equipped with mulching
blades as a standard
feature. When using
the optional vacuum
attachment,
the mulching
blades automatically
reduce debris
at a ratio of up to 16:1.
Upper
Lower
Vacuum Tube
Primer Button
Choke Lever
Elbow Tube
\
Blower
Tube
\
Fuel Mix
Thro_le
Cap
Lever
Starter
Rope
Rear
Handle
-6-

Publicidad

loading