Vornado 1303 Guia Del Propietario página 5

FEATURES
Save energy by maximizing the performance of heating and cooling systems. When you use a Vornado Air Circulator, you will not have to
set your summertime thermostat as low or your wintertime thermostat as high.
DIRECTABLE
CONTROLS
AIRFLOW
Direct the
LOW
1303
airflow where
HIGH
CONTROL
you want it.
KNOB
OFF
MED
5303, 6303,
LOW
HIGH
6803, 7503,
7803
OFF
CONTROL
KNOB
SILICONE FEET
WARNING: Choking Hazard. Keep
Non-marking feet
small parts like silicone feet away
from children and pets. added for stability.
8
English
GETTING STARTED
INSTALLING CIRCULATOR HEAD (Models 6803 & 7803 Only)
No tools required!
1. Gently place the circulator head face down on the ground on a
FINGER FRIENDLY
soft cloth to avoid scratches or damages to the unit. Insert power
DESIGN cord into the top of pole (A) and pull through the bottom (B). Align
the Lock Release Button (C) on circulator head with the hole (D)
Resists curious fingers.
located on the pole. Push the pole onto the circulator head until
the Lock Release Button snaps into place.
REMOVABLE GRILLE
For easy cleaning.
INTEGRATED CORD
B
STORAGE
Neatly secures the
cord when not in use.
A
AIR INLETS
Signature inlets and
powerful motor to
move more air.
MULTIPLE SPEEDS
Speed setting for
every comfort level.
STAND ASSEMBLY (Models 6803 & 7803 Only)
1. The upper pole and lower pole are pre-assembled, with the
fastening nut (E) secured on the underside of the base. Rotate
fastening nut counter- clockwise to remove.
2. The legs are designed to fit into the grooves (F) on the under-
side of the base cap. Assemble all the legs onto the pole, then
replace fastening nut by rotating clockwise to secure all the legs
in place.
Lock Release
Button
WARNING: Pinch Hazard between parts. Use caution
when assembling the stand.
F
E
9
English