Descargar Imprimir esta página

Powerworks LMG401 Traducción De Las Instrucciones Originales página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 17
EN
1
SAFETY
Make sure that you follow all safety instructions.
Refer to Safety Manual.
2
DESCRIPTION
2.1
PURPOSE
This machine is used for domestic lawn mowing. The
cutting blade must be approximately parallel to the
ground. All four wheels must touch the ground while
mowing.
2.2
UNPACK THE MACHINE
Make sure that you correctly assemble the machine
before use.
If parts of the machine are damaged, do not use
the machine.
If you do not have all the parts, do not operate the
machine.
If parts are damaged or missing, contact the
service center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance
with local regulations.
For your personal safety, do not insert battery before
the tool is assembled completely.
2.3
OVERVIEW
Figure 1~10
A. Upper control assembly
Handle switch
A-1
Start button
A-2
Upper handle
A-3
Upper handle knob
A-4
Upper handle bolt
A-5
B. Lower handle assembly
Lower handle
B-1
WARNING
WARNING
WARNING
WARNING
English
Lower handle screw
B-2
C. Grass catcher assembly
Grass catcher hook
C-1
Grass bag
C-2
D. Main body
Battery compartment flap
D-1
Height adjustment lever
D-2
Rear discharge flap
D-3
Slot
D-4
Safety key
D-5
Battery release button
D-6
E. Mulch plug
3
INSTALLATION
Do not use accessories that are not recommended by
the manufacturer.
Do not put in the safety key or the battery pack until
you finalised the assembly of all the parts.
3.1
INSTALL THE LOWER HANDLE
Figure 3
1. Insert the lower handle into the frame holes.
2. Tighten the screws through the holes.
Do not make damage to the cables when you install
the handle.
3.2
INSTALL THE UPPER HANDLE
Figure 4
1. Align the holes in the upper handle and the lower
handle.
2. Put the bolts through the holes.
3. Tighten the knobs onto the bolts.
4. Do the same operation on the other side.
3.3
INSTALL THE GRASS CATCHER
Figure 5
1. Open the rear discharge flap and hold it.
2. Hold the grass catcher by its handle and put the
hooks over the slots.
3. Release the rear discharge flap.
4
WARNING
WARNING
WARNING

Publicidad

loading