Publicidad
Idiomas disponibles
Idiomas disponibles
24
HOW
TO USE
SPECIAL
USE FEATURES
After
selecting
a cycle, press
the SPECIAL
USE but-
ton to select
additional
features
for your
load.
NOTE:
• To protect
your
garments,
not
every
feature
is
available
with
every
cycle.
• If the START/PAUSE
button
is not pressed
within
five
minutes
to start
the cycle,
the
control
will
shut off and all settings
will be lost.
SOAK
This option
provides
a 30 minute
presoak
prior to the
start
of the selected
cycle.
Use the SOAK
option
to
presoak
garments
to help remove
difficult
spots
or
stains
on fabrics.
At the end of the presoak
time, the
selected
cycle will begin
with
the same
water
used
for the soak.
NOTE:
You cannot
select
the
SOAK
option
in the
TUB
CLEAN,
ALLERGIENE
TM
and STEAM
WASH
cycle.
STAIN
CARE
TM
Use this
option
for
heavily
soiled
loads
that
need
improved
stain
treatment.
When
Stain Care
TM
is se-
lected,
the wash
cycle
will begin
with
warm
water
to help prevent
the setting
of certain
types
of stains.
Then, as the cycle progresses,
hot water
will be add-
ed to gradually
increase
the water
temperature
to
help remove
stains
that require
treatment
at higher
temperatures.
NOTE:
• Best results
are obtained
with
smaller
loads (less
than 6 Ibs.)
• If you
select
STAIN
CARE
TM,
the COLDWASH
TM
option
is not available.
SPIN
ONLY
Use this option
to drain the water
from
the tub and
spin out the clothes.
This can be used,
for example,
if the wash
cycle
is interrupted
by a power
failure.
The spin speed
can be adjusted
by using
the SPIN
ONLY button.
1. Press the POWER
button
to turn on the washer.
2. Press
the
SPECIAL
USE button
repeatedly
until
Spin Only is selected.
3. Press
the SPIN
SPEED
button
to select
the de-
sired
spin
speed.
Selecting
NO SPIN
is not
al-
lowed.
4. Press the START/PAUSE
button.
RINSE
+ SPIN
Select
this option
to rinse and spin a load separately
from a regular
cycle.
This can be helpful
in prevent-
ing fresh
stains
from
setting
in fabrics.
You
can
change
the spin speed
by pressing
the SPIN SPEED
button.
1. Press the POWER
button
to turn on the washer.
2. Press the SPECIAL USE button
until the RINSE+SPIN
indicator
light is lit. (The cycle light will turn off.)
3. Press the START/PAUSE
button
to start the cycle.
SPECIAL
DRAIN
FEATURE
This washer
is equipped
with
a special
feature
that
is designed
to make
your
washer
as safe
as pos-
sible. If the washer
is paused
or shut off while
there
is still water
in the tub, the water
will drain automati-
cally after
several
minutes
of inactivity.
This
helps
keep children
safe by reducing
the possibility
of wa-
ter remaining
in the tub.
Any water
remaining
in the
tub will
automatically
drain five minutes
after
the washer
has shut off.
If
the washer
is paused
and the
START/PAUSE
but-
ton is not pressed
within
5 minutes,
the washer
will
shut off and all cycle
settings
will be lost. Any water
remaining
will drain five minutes
later.
The washer
can be turned
on or restarted
any time
before
the
drain
begins.
However,
once
the water
begins
to drain, all functions
will
be suspended
un-
til the
water
has been
completely
drained
and the
washer
shuts off.
Publicidad
