LEGRAND C2G Manual página 10

HDMI® HDBaseT + USB-B to A and RS232 over Cat Extender Box Transmitter to
Box Receiver (18Gbps) - 4K 60Hz up to 328ft
Upgrade Continued
Introduction of the "Firmware Updater":
1: Select the correct model. (Upgrade transmitter:
•
select C2G30055-TX; Upgrade receiver: select
C2G30055-RX).
RS232:
•
Port: Select the correct COM Port number.
Baud rate: Select the correct baud rate, the
correct baud rate for upgrading TX/RX is 115200.
Connect: Click the button to connect with the
device.
FW version: Click "Check" button to check the
•
current firmware version of the device after
successful connection.
Update File:
•
Click "Browse" to select the FW upgrade bin file
from the local PC.
Update:
•
Click the button to start upgrading firmware after
the bin file is uploaded.
Status: Show the log of the operations on the software and returning information of the device.
•
Clear: Click the button to clear up all the log in the white box.
•
2: The progress bar will show the upgrading process.
•
8
(us)
(us)