Features; Package Contents; Mounting Bracket Installation - LEGRAND C2G Manual

HDMI® HDBaseT + USB-B to A and RS232 over Cat Extender Box Transmitter to
Box Receiver (18Gbps) - 4K 60Hz up to 328ft

Features

HDMI 2.0 and HDCP 2.2 compatibility
•
Supports transmitting 4K@60Hz 4:4:4 8bit signal without compression and supports any HDR
•
format, including Dolby Vision and HDR10+
Supports transmitting 4K@60Hz 4:4:4 & 1080P@60Hz signals up to 100m/330ft via Cat 6a/7
•
(U/FTP) cable
Supports transmitting 4K@60Hz 4:4:4 signals up to 40m/131ft via Cat 5e/6 cable
•
Supports transmitting 4K@30Hz 4:4:4 & 1080P@60Hz signals up to 70m/230ft via Cat 5e/6 cable
•
Supports USB 2.0 pass-through over HDBT, and up to 350Mbps data transfer
•
Provides USB Device ports with high power, for supporting higher power USB devices connected
•
Supports audio pass-through from transmitter to receiver
•
Supports audio de-embedding at both ends
•
Supports 1000M/100M adaptive network pass-through over HDBT
•
Supports one-way PoH function, the transmitter can be powered by the receiver
•
Supports bi-directional RS232 pass-through and firmware upgrade
•

Mounting Bracket Installation

Note: Before installation, please ensure the unit is disconnected from the power source.
1. Remove the two screws on one side of the enclosure.
2. Attach the installation bracket to the enclosure using the screws provided. The bracket is
attached to the enclosure as shown.
3. Repeat steps 1-2 for the other side of the device.
4. Mount and secure the brackets to a surface or a suitable location with mounting screws
(not included).
4

Package Contents

1 x Transmitter
•
1 x Receiver
•
1 x DC 12V Power Adapter with US,
•
UK, EU, AU power cables
1 x USB 2.0 Type-A to Type-B Cable
•
8 x Mounting Brackets (with screws)
•
2 x 3.5mm 3-Pin Phoenix Male
•
Connectors
1 x Manual
•
(us)
(us)