Descargar Imprimir esta página

Ego Power+ LT0300 Manual Del Usuario página 15

Luz de área compacta de ion litio de 56 v

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING:
tripod is sturdy enough to support the
combined weight of the light and the
battery pack.
For portable illumination,
carry the light by the top handle
(Fig. 4c).
POWERING USB DEVICES
(Fig. 5)
The USB-C port provides power of 5
Volts DC at up a combined draw of
1.5 Amperes for your USB device.
Install a battery pack into the
compact area light.
Press the power button to turn
the light ON.
Insert one end of the USB-C
cable (not included) into the
USB-C port and the other
end into the device that needs to be powered or charged. The light will begin to
charge/power the device automatically.
When the light is not in use, disconnect the device from the light, then press the
power button to turn it OFF.
Remove the battery pack from the light.
NOTE :
If the light is turned off during USB charging process, the connected USB
device will continue charging for about 2 hours.
WARNING:
the EGO battery capacity.
WARNING:
circuit may damage the USB-C port.
56V LITHIUM-ION COMPACT AREA LIGHT — LT0300/LT0300-FC
Make sure the
Runtime of the connected device is dependent upon the device and
Do not insert a nail, wire, etc. into the USB-C port. Otherwise a short
4c
5
15

Publicidad

loading

Este manual también es adecuado para:

Lt0300-fc