Allegion SCHLAGE BE365 Instrucciones De Instalación

*47327264*
47327264
Model BE365, BE365F, BE365F20
Place Label Here
Poner la etiqueta aquí
Placer l'autocollant ici
Key Keypad Latch/strike
IMPORTANT NOTES
• For BE365F and BE365F20, see Additional UL steps (Not common)
before beginning. (Not common)
• DO NOT use a power drill for installation!
• Use a screwdriver to remove product from packaging.
• Install and test lock with door open to avoid being locked out.
• Pay special attention to step 3. If lock is installed with the cam in the
wrong position, the lock will not function properly!
1
Check door preparation.
2 1/8" (54 mm) or
1 1/2" (38 mm)
5 ¹/2" (140 mm)
above knob/lever
If dimensions do
not match, you
may need to
modify your door.
Keypad Deadbolt
Visit alle.co/KPD or scan the QR code for a better digital installation experience.
Visite alle.co/KPD o escanee el código QR para una mejor experiencia de
instalación digital.
Visitez alle.co/KPD ou scannez le code QR pour une meilleure expérience
d'installation numérique.
Default Codes
Códigos de predeterminado
Codes du défaut
Bolt Baseplate
screws
1" (25 mm)
2 3/8" or 2 3/4"
(60 mm or 70 mm)
1 3/8" - 1 3/4"
(35 mm) - (44 mm)
alle.co/be365prep
Baseplate Cover Cover
screws (2) screws
2
Install the bolt.
Adjust bolt as necessary.
No change needed.
Twist the
faceplate to
extend.
Bolt must remain retracted throughout installation!
Extended
Installation Instructions
BE365F, BE365F20
UL cup
UL Baseplates and
screws
No mortise? See Change faceplate
CAUTION
Retracted
BE365F
UL screw
Reinforcement
strike