Publicidad
Idiomas disponibles
Idiomas disponibles
• When cleaning this bike, please wipe the surface with a piece of soft cloth. For very dirty areas you can
wipe it with a little neutral soap and water.
Warning: do not wash this electric bike direct with spraying water especially pressure washers. Avoid
water entering electric components as this may result in damage of the electric components.
3. Operation
Your new electric assistance bicycle is a revolutionary transport means, applying steel frame, Li-ion battery, a
super high efficiency electric hub motor and controller with electric pedal assistance system, to support
normal pedaling. The above mentioned equipment will ensure safe riding with excellent function and
performance. It is important for you to note the following guidelines to ensure getting the best possible
experience from your electric bicycle.
Checklist before riding
3.1.1 Please ensure tyres are fully inflated as indicated on the tyre wall, before riding.
Remember, performance of the bike is directly related to the weight of the rider and baggage/load, together
with the stored energy in the battery;
3.1.2 Charge overnight, prior to riding the next day;
3.1.3 Apply chain oil periodically and clean if dirty or gummed up, using a degreaser, then wipe clean and oil
bicycle chain again.
4. Battery installation & usage
The electric bikes have the battery positioned within the rear carrier (the battery pack is directly connected to
the controller box in the front (Fig. 2).
The slider of battery is fixed on carrier by bottom screws (Fig. 2.1).
Then the battery case is locked by the key (Fig. 4.1 & 4.2) see the operation details below.
(Fig. 2)
(Fig. 2.1)
22/76
Publicidad
