Publicidad
Step 27
å
Carefully stand your unit upright a few inches from its final location against a wall. We recommend using the SAFETY
STRAP for added stability.
å
NOTE: Do not turn the SAFETY DRYWALL ANCHOR into a wall stud. If you prefer to fasten the SAFETY STRAP to a wall
stud, go to your local hardware store for proper hardware.
å
INSTALLATION INSTRUCTIONS:
1. Insert the SAFETY DRYWALL ANCHOR through the WASHER and one end of the SAFETY STRAP.
2. Using a Phillips screwdriver, press the screw slightly onto the drywall through the hole in the BACK.
3. Apply pressure; turn the screw until a pilot hole is made and the nylon sheath slips through.
4. Turn the screw until it is flush against the wall and you feel a firm resistance.
5. Continue to turn until the screw starts spinning freely.
6. Pull the SAFETY STRAP the rest of the way through the hole in the BACK. Then, move your unit to its final location.
å
NOTE: Before moving your unit to a different location, unscrew the SAFETY DRYWALL ANCHOR from your wall. The
nylon sheath will remain behind your wall.
97
Washer
Safety strap
www.sauder.com/service
Safety
drywall
anchor
411201
Page 33
Publicidad
