Publicidad
Step 37
å
Carefully flip the DRAWER over.
å
Insert one SLIDE CAM (10A) into the RIGHT DRAWER SIDE (D596).
å
Fasten one DRAWER RIGHT (40CC) to the RIGHT DRAWER SIDE (D596). Use two
GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #4.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
Drawer Slide
Center the screw in the oval hole.
www.sauder.com/service
(2 screws per slide)
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
2
3
4
D596
411201
3S
Roller end
1
Screw head - turn the CAM to line
up the holes in the SLIDE with the
holes in the DRAWER SIDE.
10A
Page 43
Publicidad
