Maytag Amana Easy Touch Control 500 Guía De Uso Y Cuidado página 22

Fault Codes
SOLUTION
Noises may be heard.
There are no beeps and
SAb flashing and then
BAKE or LOCK may flash rapidly in the display to alert you if there is an error
or a problem. If BAKE or LOCK appear in the display, press the Cancel pad.
If BAKE or LOCK continue to flash, disconnect power to the appliance.
Wait a few minutes, and then reconnect power. If the flashing still continues,
disconnect power to the appliance and ca[[ an authorized servicer.
° The oven makes several low [eve[ noises. You may hear the oven relays as they go on
and off. This is normal
, As the oven heats and cooHs,you may hear sounds of meta[ parts expanding and
contracting. This is norma[ and will not damage your appliance.
, A fan sound can be heard. This is the cooling fan and is normal The fan will
continue to run after use until the oven cools.
° Control may be in Sabbath Mode. See page 13.
° Control may be locked. See page 8.
° Oven is in Sabbath Mode. To cancel press and hold the Clock pad for five
seconds.
21