Publicidad
STEP 3:
Attach Fixing Axle for Pedal (No. 47) into
the bottom hole of Main Frame (No. 1)
using 1 Screw (No. 54). Secure and
tighten with Spanner (No. 75).
Attach 2 Bolts (No. 46) into the upper hole
of Main Frame (No. 1) through Pedals
(No. 26L/R). Secure and tighten with
Spanner (No. 75).
NOTE: The Fixing Axle for Pedal (No.
47) should be attached into the middle
position of Main Frame (No. 1).
STEP 4:
Insert the Seat (No. 31) into the Sliding
Rail (No. 5).
Attach the Sliding Rail (No. 5) onto the
Rear Support (No. 3) using 4 Screws
(No. 56) and 4 Washers (No. 60). Tighten
and secure with Allen Wrench (No. 74).
-37-
Publicidad
