Publicidad
Idiomas disponibles
Idiomas disponibles
Transporting the unit
Preparation
Disconnect all connected devices and cables from the
unit.
1
Hold the handle of the unit firmly when
transporting the unit.
2
Place the unit on a flat, stable surface with the
rubber feet facing down.
Placement
You can place this system vertically or horizontally.
Vertical placement
Note:
•
Keep your speakers more than 10 mm from other objects for
proper ventilation.
•
These speakers do not have magnetic shielding. Do not put
them near TVs, PCs or other equipment easily influenced by
magnetism.
•
When you play at high levels for a long period, it can cause
damage to the speakers and decrease the life of the
speakers.
•
Decrease the volume in these conditions to prevent
damage:
–
When the sound is distorted.
–
When you adjust the sound quality.
CAUTION!
• Improper handling or transportation manner may
cause the unit to fall, etc., resulting in damage
and/or personal injury.
• Do not place the unit on a sloping or unstable
surface.
• Do not place your feet under the unit.
• Do not touch the speaker cone's reverberating
surfaces:
– This may damage the speaker cone.
– The speaker cone may be hot.
• Do not put the unit on a table or any elevated
surface.
• Do not allow children to climb on the unit.
• Be careful when babies or children are near.
4
4
Horizontal placement
(Place the side with the
rubber feet facing down.)
Making the connections
Connect the AC mains lead only after all the other
connections have been made.
Connect the AC mains lead.
Do not use any other AC mains lead except the supplied
one.
Rear view
For Latin America
If the power plug does not fit your socket, use the
supplied AC plug adapter.
Conserving power
The system consumes a small amount of power when it is
in standby mode. Disconnect the power supply if you do
not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
To household
mains socket
Publicidad
