Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
The FAN may be operated by the manual controls located on the FAN (as
shown in Fig 4 ) or by your remote control (shown in Fig 3) .
1.
Place the FAN on a stable flat surface. Plug the cord set into a 220-240V~
electrical outlet. Plug on the FAN, existing room temperature will be
displayed at display panel.
2. POWER
FAN off by pressing the 'POWER' button again.
SPEED
3.
medium, or high by pressing 'SPEED' . The speed setting is displayed on
the LED panel (shown in Fig. 5) .
MODE
4.
mode, NATURAL mode,SLEEP mode and Child mode
AL Mode
- NORM
- NATURAL Mode
medium speed(5s)→high speed(5s)→medium speed(5s), it works as per
this recycle.
- SLEEP Mode
at high speed at 30 mins, then transfer to medium speed at 30 mins and
transfer to low speed until fan stop working. 2）If you set the mode at
medium speed, fan will work at medium speed at 30 mins, then transfer to
low speed until fan stop working. 3）If you set the mode at low speed, fan
will work at low speed until fan stop working. The LED Display will turn off
if you don't control the fan in 30 seconds, touch any button to turn on the
display.
:
Turn the FAN on by pressing the 'POWER' button; Turn the
You can adjust the fan speed to the desired level: low,
:
:
Pressing the 'MODE' button will set the FAN into NORMAL
:
Fan will start work at any speed you set up.
:
1）If you set the mode at high speed, fan will work
:
Fan will start work at low speed(5s)→
5
Publicidad
