Klarstein DRYFY 60 SMART Manual Del Usuario página 32

EN
32
Before storage
If you will not be using the device for a long period of time (more than a few
weeks), follow the steps below.
1. Disconnect the unit from the mains.
2. Empty the water tank and dry it with a cloth.
3. Clean the filter and let it dry completely in a shaded area.
4. Put the filter back in place.
5. Store the device in a dry and well-ventilated place. Make sure that the device is
always upright.
TROUBLESHOOTING
Problem
The appliance is not
working.
Dehumidifying the room
air is not effective.
No air is blown out.
Possible cause
The mains plug is not
plugged into the socket.
The water tank may
be full or installed
incorrectly.
The room temperature
is lower than 5 °C or
higher than 32°C.
The room temperature
or humidity is too low.
The air inlet or outlet is
blocked.
The ventilation grille is
blocked.
Solution approach
Insert the mains plug
into the socket.
Drain the water from the
water tank or insert it
correctly.
This is normal at these
temperatures and is not
a fault condition.
In the dry season, the air
dehumidification ability
is reduced.
Clean the air inlets and
outlets.
Clean the ventilation
grille.