Publicidad
Idiomas disponibles
Idiomas disponibles
Unpacking
1.
Remove unit from carton and discard all packaging.
HOW TO SET UP YOUR
UNIT
Location
of the Air Compressor
•
Locate the air compressor
in a
clean, dry and well ventilated
area.
•
The air compressor should be
located at least 12" away from
the wall or other obstructions
that
will interfere with the flow of air.
•
The air compressor
pump and
shroud are designed to allow for
proper cooling. The ventilation
openings on the compressor are
necessary to maintain proper
operating temperature.
Do not
place rags or other containers on
or near these openings.
GROUNDING
INSTRUCTIONS
Risk of Electrical
Shock.
In the
event of a short circuit, grounding
reduces the risk of shock by
providing an escape wire for the
electric current. This air
compressor must be properly
grounded.
The portable air compressor
is
equipped with a cord having a
grounding wire with an appropriate
grounding
plug (see following
illustrations).
1.
The cord set and plug with this
unit contains a grounding
pin.
This plug MUST be used with a
grounded outlet.
IMPORTANT:
The outlet being used
must be installed and grounded in
accordance
with all local codes and
ordinances.
Make sure the outlet being used
has the same configuration
as
the grounded plug. DO NOT
USE AN ADAPTER.
See
illustration.
G_ro_
Pm
_Grounded
.
.
_Outlets
3.
Inspect the plug and cord before
each use. Do not use if there are
signs of damage.
4.
If these grounding instructions
are not completely
understood,
or if in doubt as to whether the
compressor
is properly
grounded, have the installation
checked by a qualified
electrician.
Risk of Electrical
Shock. IMPROPER
GROUNDING
CAN RESULT IN
ELECTRICAL SHOCK.
Do not modify the plug provided.
If
it does not fit the available outlet, a
correct outlet should
be installed
by a qualified electrician.
Repairs to the cord set or plug
MUST be made by a qualified
electrician.
A05563
10-ENG
Publicidad
