Linsar YLW6336 Manual Original página 69

Clean fresh water tank
1. Remove the fresh water tank 4 from the device and empty it.
2. Insert the fresh water tank 4 . Switch the device on again and press the watering
button 6 to drain the remaining water.
3. Tilt the device and pour out the remaining water.
Cleaning the dirty water tank
1. Remove the waste water tank 1 from the device and empty it.
2. Clean the waste water tank 1 , the cover and the seal under running water.
3. Fit the seal and cover to the dirty water tank 1.
4. Insert the waste water tank 1 into the device.
69