Linsar YLW6336 Manual Original página 70

Troubleshooting
Troubleshooting
Malfunction
The device cannot be
switched on.
The unit switches itself off
during operation.
No water comes out of the
water outlet 17 when you
press the watering button
6 .
The suction power is weak.
If the problem persists, contact the customer service listed on the last page.
Technical data
Model:
Mains connection:
Dimensions:
Declaration of conformity
You can request the EU declaration of conformity from the address
provided at the end of this manual.
Disposal
Possible cause
The power supply is
interrupted.
The overheating
protection has
triggered.
The water outlet is
blocked.
The dirty water tank 1 is
full or not inserted
correctly.
The hose 8 is leaking.
The suction inlet 15 of
the water vacuum
cleaner (13 / 14 ) is
blocked.
YLW6336 / CSC-ECOM
230-240 V ~; 50 Hz
approx. 31 x 20 x 29 cm
70
Troubleshooting
Check the mains plug for
correct seating. Check the
power socket with another
appliance.
Let the unit cool down before
switching it on again.
Remove the water suction
device (13 / 14 ) from the unit
and flush the water outlet with
clean water.
Empty the dirty water tank 1
and insert it properly into the
device.
Check the hose 8 and
accessories for correct fit.
Remove the water vacuum
cleaner (13 / 14 ) from the
device and rinse it with clean
water.