Descargar Imprimir esta página

ESAB 0401510 Manual Do Usuário página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

1
SAFETY
This manual has the purpose to guide experienced people about installation, operation and maintenance
for
Origo Arc
TM
rectifier.
DO NOT allow non-qualified personnel to install, operate or repair this equipment. Read and understand all
information in this manual.
Remember that:
¡
As with any machine or electric equipment must be unplugged from the energy source before any
preventive or corrective maintenance should be done.
¡
In order to carry out any internal measures or interventions that require the equipment to be on make sure:
1)the equipment is correctly grounded;
2)the working area is dry;
3)all the internal and external electric connections are correctly tightened.
¡
On the other hand, the technician that measures or intervenes must be appropriately protected against
electric shock, and must use adequate devices and tools for work on electric circuits.
¡
Conditions above equally apply to the welding work. Besides these conditions make sure the electrode-
holder is in perfect conditions of isolation and that all-electrical contacts existing in the feed and welding
circuits are safely tight.The welder must always be appropriately protected against the effects of electrical
arc, electric shocks and welding spatters.
E
lectrical shock can kill
W
elding smoke and gases can be harmful to your health
E
lectrical arcs burn the skin and hurt your sight
N
oise in high level can damage your hearing
S
park and metal particles and wire end can hurt your eyes
15

Publicidad

loading