Publicidad
Idiomas disponibles
Idiomas disponibles
- Child Mode
function will start. And it will work at high speed at 15 minutes, transfer
to medium speed at 15 minutes, then transfer to low speed until it take
off. You can take off oscillation function by manual. The LED Display
will turn off if you don't control the fan in 30 seconds, touch any button to
turn on the display.
TIMER
5.
length of operation from 1 hour to 12 hours.The LED Display will turn off if
you don't control the fan in 30 seconds, touch any button to turn on the
display.
OSCILLATION
6.
oscillation function. The symbol is displayed on the LED panel.(shown in
Fig 5)
DISPLAY
7.
button on the remote or by pressing and holding the SPEED button on the
control panel for more than 3 seconds, the display will light up again once
any control button is activated.
Cable hook:
8.
and install on the back side of the fan. The power cord can be hanged at
the cable hook when the fan is not in
:
Fan will auto. Set up timer at 3 hours, oscillation
:
The fan is equipped with a timer that allows you to set its
Pressing the 'OSC' button will start and stop the
:
: C
an be switched off temporarily by press the LED
The cable hook is packed in the user manual, take it out
(
Fig 5)
used.(Fig
6) .
8
Publicidad
