Kenmore 30 Instrucciones De Instalación página 2

30" GAS SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
(Models with Sealed Top Burners)
NOTE:
1. Do not pinch the power supply cord or the flexible gas conduit between the range and the wall.
2. Do not seal the range to the side cabinets.
3. 24" (61 cm) minimum clearance
between the cooktop and the bottom 2134"
of the cabinet when the bottom of
(5525 cm)
wood or metal cabinet is protected C
by not less than 44" (0.64 cm) flame
retardant millboard covered with not
less than No. 28 MSG sheet metal, Figure 1
0.015"(0.4 mm) stainless steel,
0.024"(0.6 mm) aluminum, or 0.020"
(0.5 mm) copper.
30" (76.2 cm) minimum Door Open
clearance when the cabinet is (see note 5)
unprotected.
4. For cutouts below 22 7/8"(58.1 N
m), appliance will slightly show L
out of the cabinet. <
5. Allow at least 19 4%" (48.9 cm) >
clearance for door depth when
it is open.
Side panel
*IMPORTANT: To avoid cooktop cooktop (or glass) breakage for cutout width (E
dimension) of more than 30'/,," (76.4 cm), make sure the appliance is centered in the
counter opening while pushing into it. Raise leveling legs at maximum position, insert
the appliance in the counter and then level. Make sure the unit is supported by
the leveling legs not by the cooktop (or glass) itself.
22 7/8" (58.1 cm) min.
23 1/4" (59.05 cm) max.
(see Note 4)
: >|
FRONT
OF |*—— F, ——
CABINET
A eG) BODin C COORIOP D.DEPIn IO BE CUIOULWIDIE: F.CUIOUL G. -EGH
VADIA PRON] OF RANGE | (Countertop and Cabinet) DEPTH OF COUNTERTOP
35 5/8" (90.5 cm) - "(76,2 cm) | 31%" (80 cm) | 28 5/16" (71,9 cm) | 3041/16" (76,240,15 cm) | 21 3/4" (55,2 cm) Min. 36 5/8" (93 cm) Max.
36 5/8" (93cm) 22 1/8" lee 2 am Max | 35 5/8" So 5 cm) Min.
24" (61 cm) Min. with
backguard