Publicidad
Idiomas disponibles
Idiomas disponibles
Washer
does
not
operate:
° Check it unit is plugged
in. The plug may have come loose.
, Check it the electrical
wail receptacle
is of proper
voltage.
, Check if the circuit
breaker
needs to be reset or if the fuse
needs to be replaced.
, Check if the washer
is overloaded:
load may need to be
re-balanced
and clothes may need to be redistributed.
° Check if the lid is open. You may have to dose the lid properly.
, The washer
pauses in some cycles. This is normal
in delicate
or
hand-washable
cycle, which has short soak period
where your clothes
are being soaked
for very short period
of time. You will not hear washer
operation
for a short period
of time. When the soak time is over,
it will start automatically.
Prob|ems
with
water:
, Not enough
water coming
out: Water
faucet may need to be turned on
fully. Water hoses may be tangled
up or wrinkled
up. Straighten
up
hoses. Check water level selection,
it may need to be readjusted.
, Water Temperature
is incorrect:
Check your water heater temperature.
Hot water needs to be at a temperature
at least 120'F.
-140'F
(49'C
- 60 C.). Check to make sure the inlet hoses are properly
connected.
(e.g. hot to hot & cold to cold)
• Water leaks: This is due to not properly
installing
drain
hose or fill
hoses. Your home drain
may be dogged
or having
constant
water pressure.
You may need to tighten hoses, check the
plumbing
or call a plumber.
, Water will not drain:
This is due to not installing
your
drain
hose
properly.
You may need to connect
the drain
hose properly.
Check the
position
of the drain
hose. In order to drain
properly,
make sure that top
of drain
outlet is less than 4 ft. (1.2 m) above the floor.
16
Publicidad
