3. Connect the other end to their respective
washer
inlet located
at the rear of the washer.
Note:
Hot water needs to be at a temperature
of at least 120F
- 140'F.
(49'C-
60°C) for the soap to dissolve and to avoid soap residue
remaining
on clothes.
4. Using the drain
hose damp,
attach the drain
hose to the unit as shown
below.
Install the drain
hose hook to the outer drain
hose tube.
J
J
J
J
J
5. Plug in the Washer
to a regular
115 volt / 60 Hz, 15 amp outlet.
21