Publicidad
Idiomas disponibles
Idiomas disponibles
Ope_aIi_g
P_eeedu_e
1 Press power
on button
• The washer
will now be in the working
status in the Normal
cycle
• If the Start/Pause
button is not pressed within
5 minutes
after powering
on the unit
it will automatically
switch off and return to the stand by mode.
• The washer
wiJi also return to the stand by mode
immediately
after completion
of
the wash process.
, Regardless
of the settings by pressing
the power on/off
button all programs
will
stop and return to the stand by mode.
, The washer
has intelligent
wash resumption.
If the power
was interrupted
at the
power source and then when the power
is resumed
the washer
will resume
working
at the stopped
position.
2. Selection of Cycles
• When
the washer
is powered
on the Normal
cycle is the default
cycle. If other
cycle is required
press the cycle button for desired
program.
3. Process Select
• Once the power
is switched
on the washing
machine
will automatically
set the
Normal
cycle which will W_sh,
Rinse and Spin. If other selection
combinations
are desired,
press the Process Setect button to choose.
mete:
Spin shall begin after some time even if there is no water in the tub. Do not
use soak process for woolen
clothes.
Clothes prone to fading
should
be
washed
separately.
Publicidad
