HIKOKI DH 36DPE Instrucciones De Manejo página 11

Power Output
Wh
2 to 3 digit number
USB DEVICE CONNECTION
PRECAUTIONS (UC18YSL3)
When an unexpected problem occurs, the data in a USB
device connected to this product may be corrupted or lost.
Always make sure to back up any data contained in the USB
device prior to use with this product.
Please be aware that our company accepts absolutely no
responsibility for any data stored in a USB device that is
corrupted or lost, nor for any damage that may occur to a
connected device.
WARNING
○ Prior to use, check the connecting USB cable for any
defect or damage.
Using a defective or damaged USB cable can cause
smoke emission or ignition.
○ When the product is not being used, cover the USB port
with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke
emission or ignition.
NOTE
○ There may be an occasional pause during USB
recharging.
○ When a USB device is not being charged, remove the
USB device from the charger.
Failure to do so may not only reduce the battery life
of a USB device, but may also result in unexpected
accidents.
○ It may not be possible to charge some USB devices,
depending on the type of device.
NAMES OF PARTS (Fig. 1–Fig. 22)
Handle
Switch trigger
Pushing button
Housing
Side handle
Depth gauge
Drill bit
Front cap
Grip
Name plate
Change lever
Gear cover
Cap*
Motor
LED light
Battery
Display panel
Changeover switch
Display lamp
Auto stop lamp
Indicator lamp
Nozzle
Depth adjustment
button
Nozzle adjustment
button
Dust housing
Dust box
11
Dust box latch
Filter
Adapter
Latch
Charge indicator lamp
Indicator lamp: Lights
Grease
Pushing button
(Change lever)
Cold chisel
Auto stop lamp: Blinks
* Do not remove the cap ( ) from the rotary hammer unless
you are installing the dust extractor system. Operating
the tool with the cap removed will decrease work output.
In addition, dust can clog the net which may result in
malfunction.
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
DH36DPE: Cordless Rotary Hammer
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
V Rated voltage
n
No-load speed
0
Bpm Full-load impact rate
φ
Drilling diameter, max.
max
Weight*
(According to EPTA-Procedure 01/2014)
kg
Concrete
Steel
Wood
Hammering only function
English
Auto stop lamp: Lights
Battery sliding
grooves
Terminal (Product)
Air gun
Terminal (Battery)
Sliding grooves
Rubber cover
USB port
USB cable