Alpina PTC-2021 WIFI GLASS Manual De Instrucciones página 12

Open window
detection
(ALPINA APP)
Set up
Power-off
protection
Open window
detection
The Light flickering
1. Open the "ALPINA" app,add the device. Find the small
home appliances, you will found the heater(Wi-Fi). Select it
to connect to your home WI-FI.
2. Please select the status of the indicator light -Blinking or
breathing rapidly.
(Long press the black switch in the device side for 3
seconds to connect to WIFI)
3. You could enter the operation interface when you found
on device. Press "
(Fan keep working for 30 seconds when shutdown the
appliance after heating). Press "+" "-" to adjust temperature,
Temperature range: 18-45°C.
4. Enter the Gear screen, can set cool fan,heat level 1,
heat level 2
5. 5.Enter the Function screen,can setting the week
timer,window opening,swinging functions and temperature
setting.
Default start up
1. Open window detection can only be
start up when appliance is in heating
mode (cannot start up the appliance
when it's on only fan working) or in set
temperature mode.
2. Press " ", Open window detection
on, Open window detection off.
3. Temperature detection start up 1
minute after Open window detection
start up. Per 10 minutes (temperature
slow down detection check point)
as a round, in one round, detect the
temperature once every 5 minutes
(temperature fast down detection
check point). Details in a separate
tabel called : Extra instruction ''Open
window detection''.
" as follows: ON(Fan working), OFF
Maximum detection temperature is 51°C,
the appliance shutdown when detected
temperature reach 51°C.