Alpina PTC-2021 WIFI GLASS Manual De Instrucciones página 9

USING THE HEATER AND REMOTE CONTROL
1. Put the plug in the wall socket,and switch "on" the main switcher.
The LED screen is working.
2. Press the Start/Stop button at the edge of the appliance to start
the heater. It will start working on high heating. Any other function
is available with the remote control.
3. After you stop the appliance- it would cool down itself for
30s by ventilator.
4. 1)Turn on the power switch, LED display Environment temperature,
the appliance is standby.
2)There is a switch behind the appliance base, press the «button»,
It will start working on high heating, then press again to stop
the heating. The fan will continue to oparate for 30 seconds, the
appliance will be shut down.
3)All function need to be operated by remote control.
4)Fan keeps working for 30 seconds adfter shutting down the
appliance (after heating).
Note: The indicator lights when corresponding function is working.
"-": is "ON". "0": is "OFF".