Descargar Imprimir esta página

GE DVM1950 Manual Del Propietrario página 28

Ocultar thumbs Ver también para DVM1950:

Publicidad

Idiomas disponibles

Idiomas disponibles

Replacinq the liqht bulb.
Cooktop Light/Nite
Light
Replace with a 120 volt, 25 or 50 watt (max.)
halogen bulb. Order WB36X10213from your
GEsupplier.
M To replace the cooktop light/nite light, first
disconnect the power at the main fuse or
circuit breaker panel, or pull the plug.
I_ Remove the screw from the side of the
light compartment cover and lower the
cover until it stops.
_1 Be sure the bulb is cool before removing.
Break the adhesive seal by gently
unscrewing the bulb.
I_1 Screw in the new bulb, then raise the light
cover and replace the screw. Connect
electrical power to the oven.
About the exhaust feature.
Charcoalfilter (onsome models).
Vent Fan
The vent fan has two metal reusable vent
filters.
Models that recirculate air back into the room
also use a charcoal filter.
Reusable vent filters
(on oil models).
Reusable Vent Filters
The metal filters trap grease released by foods
on the cooktop. They also prevent flames from
foods on the cooktop from damaging the
inside of the oven.
For this reason, the filters must always be
in place when the hood is used.The vent
filters should be cleaned once a month, or as
needed
28

Publicidad

loading

Este manual también es adecuado para:

Jnm1951Jvm1950