Manual; Watt Constant; T-Ride; Preset Programme - Tunturi E-80R Recumbent Bike Manual Del Usuario

English
To stop your workout see: "End your workout"

Manual

- Turn the jog wheel and select
"Manual"
- Press the jog wheel to confirm and enter the Setting
screen (Fig. F-09).
- Turn jog wheel to select item
- Press the jog wheel button for confirmation and
continue the range setting at the right.
- Turn jog wheel to change setting ranges
- Press the jog wheel button to confirm and enter the
Workout screen. (Fig. F-03)
The X axis denote time in minutes between 0~30. It is
updated once every 15 minutes during workout
- During workout, press the jog wheel button to
switch the Y-axis between Nm- bpm.
- The bar chart denotes torque value Nm. Rotate the
jog wheel to adjust the Nm value.
- The white dot line shows current position, which
moves rightward as workout time increases. The
workout screen could show 5-hour data at most.
To stop your workout see: "End your workout"

Watt constant

- Turn the jog wheel and select
"Watt Constant"
- Press the jog wheel to confirm and enter the Setting
screen (Fig.F-10).
- Turn the jog wheel to adjust target Watt value.
- Press the jog wheel to confirm and enter the Setting
screen (2) (Fig. F-11)
- Turn jog wheel to select item
- Press the jog wheel button for confirmation and
continue the range setting at the right.
- Turn jog wheel to change setting ranges
- Press the jog wheel button to confirm and enter the
Workout screen (Fig. F-12)
The X-axis unit is shown according to the selection of
Energy/Time/Distance in Set screen.
Energy Unit:
Time Unit:
Distance Unit: km in metric
- During workout, press the jog wheel button to
switch the Y-axis between Nm - bpm
- The bar chart denotes the Watt value. Rotate the
jog wheel to adjust the Watt value
- The white dot line shows current position, which
moves rightward as calorie /time/distance increases
kcal
min
mile in Imperial
- The orange curve shows the user's actual heart rate,
which varies as the heart rate frequency goes up
and down
- Console programming: Assist the user to achieve
the target according to its target Watt value input
during workout. When actual Watt value > target
value, the system would decrease Watt value; while
increases Watt value when actual Watt rate < target
value.
To stop your workout see: "End your workout"

T-Ride

- Turn the jog wheel and select
"T-ride"
- Press the jog wheel to confirm and enter the Setting
screen (Fig F-13).
- Turn the jog wheel to select between: Top and
Down - Trail - Easy Ride - Marathon - Short Loop
- Press the jog wheel to confirm and enter the Setting
screen (2) (Fig. F-14)
- Set up the Startup point of Workout: rotate the jog
wheel button to adjust the left white dot line, press
the jog wheel button for confirmation.
- Set up the Ending point of Workout: rotate the
jog wheel button to adjust the right white dot line,
press the jog wheel button for confirmation then
enter the Workout screen. (Fig. F-15)
The X-axis is shown as distance unit, km in metric and
mile in Imperial
- During workout, press the jog wheel button to
switch the Y-axis between m-bpm in metric, ft-bpm
in imperial
- The white dot line shows current position, which
moves rightward as distance increases
- In the right of the screen is the gear shift from 1~8,
Turn the jog wheel button to switch
- The white icon + 0°in the left bottom of the screen
shows the incline level and it varies with the Profile
incline level change.
- The Last Session screen shows workout data. Press
the jog wheel button to return to Main menu
To stop your workout see: "End your workout"

Preset Programme

- Turn the jog wheel and select
"Preset Programs"
- Press the jog wheel to confirm and enter the Setting
screen (Fig. F-16).
- Turn the jog wheel to select between:
2 4